W-2810 User’s Manual  5000 x 1g

Avoid any exposure to extreme heat or cold. Your scale will work better when operating in normal room temperature. Always allow the scale to acclimate to normal room temperature for at least an hour before use.

Give the scale sufficient warm up time before use. Usually 30 to 60 seconds to give the internal components time to stablize.

Keep your scale in a clean environment. Dust, dirt, moisture, vibration, air currents, or a close proximity to other electronic equipment can cause an adverse effect on the reliability and accuracy of your scale.

Handle with care. Gently apply all items to be weighed onto the weighing surface. Although this scale is designed to be quite durable, avoid rough treatment as this may permanently damage the internal sensor.

Do not shake, drop, or otherwise shock the scale. This is a precision instrument and must be handled with extreme care.

Only operate the scale on a stable, vibration free surface.Always store in a dry place to avoid moisture accumulation on internal components.

I. Operation

Place the scale on a flat surface. If you do not wish to use the bowl, remove it before proceeding

1. Select between grams or ounces using the switch on the bottom of the scale.

2. Press ON/OFF key.

3. Wait until [0.0] is displayed.

4. You may now add the item(s) to be weighed.

II. Tare Weighing

You may use your own container by doing the following.

1. Turn on scale as described above.

2. Place the container ( tare item ) on the platform.

3. Press TARE and wait until [0.0] is displayed.

4. Add the "net-weight-item".

Error Code Descriptions:

Error: Nothing on screen, [LO]

Solution: Replace Batteries 

Error: [EE]

Solution: Load is in excess of 5000g, remove the extra load